Learn “How To” Catamaran Like a Pro.

In this episode, join Joe Fox as he walks you through the intricate process of docking a catamaran in a tight berth with a crosswind.

In this guide, we delve into the intricacies of flying a Code Zero on a catamaran, specifically the Lagoon 46. Join our expert, Joe Fox, as he walks you through the setup, preparation, and manoeuvres involved in harnessing the power of this versatile sail.

In this guide, we delve into the intricacies of flying a Code Zero on a catamaran, specifically the Lagoon 46. Join our expert, Joe Fox, as he walks you through the setup, preparation, and manoeuvres involved in harnessing the power of this versatile sail.

In this instructional piece, we delve beneath the waves to explore the underwater profile of the a Lagoon Catamaran. Join us as we dissect the key features and maintenance points of the Lagoon 46, offering insights into what to look for during routine upkeep.

We’re excited to introduce you to a groundbreaking development in the world of catamarans – Lagoon Catamarans’ new Furling Boom System. This video and blog will delve into the details of this exciting development, featuring an interview with the mastermind behind the project, Bruno Belmont, Lagoon Catamarans’ multihull expert, as well as an exclusive first look with Joe Fox from TMG.

In this episode, we will delve into the art of sail trimming when sailing downwind. Whether you’re a seasoned sailor or just beginning to explore the boating world, understanding the nuances of sail trim can significantly enhance your boat handling abilities. Join our expert team as we provide insights, tips, and techniques to help you optimise your downwind sailing experience.

In this blog, we will look at how to trim your sails when sailing upwind. Sailing upwind is classified as sailing at any angle lower than 90 degrees to the wind. Sailing directly into the wind is not possible; therefore, to sail in the direction of the wind, you must continuously tack in a zig zagging motion.

In this episode, Joe teaches us how to prevent chafing and what the critical chafing points are on a cruising catamaran.

Learning to sail is all about the little things… In this episode we discuss how to safely and successfully use an electric winch similar to the Harken 2 speed (most operate similarly).

In this episode of the Inspire and Learn Series, catamaran expert Joe Fox talks us through how to unfurl the jib / genoa on your Lagoon.

In this episode of the Inspire and Learn Series, catamaran expert Joe Fox talks us through how to unfurl the jib / genoa on your Lagoon.

In this blog we are going back to basics. Joe Fox talks us through how to lower the mainsail.

Here is how to hoist the mainsail on a Lagoon and similar catamarans. We walk you through what you need to do from leaving the dock to setting sail.

We go back to basics with this video on what to do before leaving the dock. Here is your boating pre-departure checklist.

Back by popular demand, Joe Fox demonstrates the two ways of Med Mooring using an anchor and a mooring block and lines.

In this episode, John Gamlin from our exclusive service department VesselTec explains the simple steps for an engine inspection. John goes down into the engine bay and walks us through WOBBLES and what to do if you find something abnormal.

In this episode, John Gamlin from our exclusive service department VesselTec introduces engine maintenance by showing us what tools, spares, and cleaning equipment he recommends all owners should have on board at all times.

In this episode, we’re going to be looking at reefing and why you use your reefing lines, how the single line reefing on a Lagoon 42 is run and the processes involved with lowering the sail to reduce your sail area when the wind strength builds.

We are excited to share the latest Inspire and Learn Episode with you all, this one is a bit of a different “bonus” video where rigging specialist Dion Hart explain how they set up the rig, differences between catamarans and monohulls and the advantages of Lagoons new rig design.

For this episode, we had Sam Newton, Americas Cup and Sail GP pro sailor and owner of Rolly Tasker sails join us to give you tips on how to better trim your sails. Sam also walks us through how to tack and gybe with a normal sail set up and how to use the Code Zero.

In our third episode of the Inspire and Learn series The Multihull Group got rigging specialist Dion Hart to come and guide you through what to look out for in a regular rig check. Dion explains various important areas of your catamaran to inspect and some tips for going up the mast.

In our Docking Episode, Part 2 Joe Fox explains how to park your catamaran bow first and stern first. 

This demonstration was done on the Lagoon 42 and is intended to give you confidence in your catamaran handling ability.

Catamaran Manoeuvring TipsIn our second episode of the Inspire and Learn Series, catamaran expert Joe Fox talks us through how to effectively leave a dock with and without a stern spring line. He also goes through a number of tips for manoeuvring a catamaran in confined spaces such as a marina....

In our first episode of the Inspire and Learn Series, catamaran expert Joe Fox talks us through the best technique for a safe and secure anchor, as well as how to set up a bridle.
We go through the step by step process and concentrate on the 6 main components of anchoring onboard the Lagoon 42.